BSU2-50B BATTERY SUPPORT UNIT

US$988.00

OVERVIEW

BSU2-50B provides a stable voltage and up to 50 amps of fully regulated power to prevent loss of charge and damage to the battery.

BSU2-50 can be used with any 12V automotive battery including AGM, GEL and Lithium (LiFePO4).

This low profile (3.5”) BSU2-50B battery support unit provides a constant voltage to prevent loss of data and possible damage to control units during software updates, and module reprogramming as well as diagnostic processes when in a Key On, Engine Off state.

During diagnostic or programming operations, the vehicle’s systems are operating solely from the battery. Maintaining battery charge during this process is critical.

Designed to be wall, ramp or trolley mounted the BSU2-50B has been designed to meet the needs of the high power consuming vehicle.

Compatible with LiFeP04 with 12V Lithium - All technologies

Comes with 16ft (4.8M) lead set and 8’ (2.4M) C15 to 5-15P power cord.

Please note we are currently shipping direct from the UK so expect delivery in 1-2 weeks.

OVERVIEW

BSU2-50B provides a stable voltage and up to 50 amps of fully regulated power to prevent loss of charge and damage to the battery.

BSU2-50 can be used with any 12V automotive battery including AGM, GEL and Lithium (LiFePO4).

This low profile (3.5”) BSU2-50B battery support unit provides a constant voltage to prevent loss of data and possible damage to control units during software updates, and module reprogramming as well as diagnostic processes when in a Key On, Engine Off state.

During diagnostic or programming operations, the vehicle’s systems are operating solely from the battery. Maintaining battery charge during this process is critical.

Designed to be wall, ramp or trolley mounted the BSU2-50B has been designed to meet the needs of the high power consuming vehicle.

Compatible with LiFeP04 with 12V Lithium - All technologies

Comes with 16ft (4.8M) lead set and 8’ (2.4M) C15 to 5-15P power cord.

Please note we are currently shipping direct from the UK so expect delivery in 1-2 weeks.

FEATURES

  • BSU2-50B can be used with any 12V automotive battery including AGM, GEL and Lithium Iron (LiFePO4)

  • When the battery is charged the BSU is a regulated power supply to sustain accessory loads and offset parasitic drain

  • Designed for use in the workshop and compatible with most diagnostic trolleys

  • Reverse polarity protection

  • Output current display

  • Supplied with 5m IEC power lead (BSU2-50-LS)

  • Also supplied with 5m output leads

  • Volvo OEM part number is 9513211

SPECIFICATION

INPUT: 110-240v AC 50/60Hz

WEIGHT: 13.2lb

SIZE: 11”x7.5”x3.6”

CARTON: 12.6”x9.9”x9”

OUTPUT: 13.4v up to 50A continuous

ORDER BSU2-50B REPLACEMENT PARTS

We sell replacement parts for the BSU2-50. Click on the part you need below:

BSU2-50-LS

Mains Leads

SB50-YEL

 

You May Also Like