MPL50-LI BATTERY CHARGER

from US$1,250.00

OVERVIEW

The MPL50-LI charger has been designed with the latest workshop standards in mind.

Suitable for most common battery types – LiFePO4, Ca/Ca, Ca/Ag, AGM, GEL and conventional lead acid.

The MPL50-LI features a contactor reset mode for reactivating disabled/highly discharged LiFePO4 batteries.

MPL50-LI is available with an optional temp sensing lead set allowing the ultimate in efficient charging.

MPL50-LI also features a 13.4V constant output mode for battery support functionality at up to 50A.

MPL50-LI is compatible with CDU-1 Charge Distribution Unit.

Comes with 16ft (4.8M) lead set and C15 to 5-15P power cord - either braided, or smooth.

Compatible with LiFeP04 with 12V Lithium - All technologies

Please note we are currently shipping direct from the UK so expect delivery in 1-2 weeks.

Lead Type:

OVERVIEW

The MPL50-LI charger has been designed with the latest workshop standards in mind.

Suitable for most common battery types – LiFePO4, Ca/Ca, Ca/Ag, AGM, GEL and conventional lead acid.

The MPL50-LI features a contactor reset mode for reactivating disabled/highly discharged LiFePO4 batteries.

MPL50-LI is available with an optional temp sensing lead set allowing the ultimate in efficient charging.

MPL50-LI also features a 13.4V constant output mode for battery support functionality at up to 50A.

MPL50-LI is compatible with CDU-1 Charge Distribution Unit.

Comes with 16ft (4.8M) lead set and C15 to 5-15P power cord - either braided, or smooth.

Compatible with LiFeP04 with 12V Lithium - All technologies

Please note we are currently shipping direct from the UK so expect delivery in 1-2 weeks.

FEATURES

  • Contactor reset mode for LiFePO4

  • Manufactured in the UK

  • Short circuit shutdown without blown fuse

  • Reverse polarity protection

  • Fast constant current bulk charge

  • 3-stage charging: CI-CV-Float

  • Constant voltage float/standby

  • Flexibility – to match battery specification

  • Proportional timing – minimal gas emission

  • Independent overrun timer

  • Battery Support Mode up to 50A

  • 5M detachable output leads

  • Accurate zero-crossing voltage sensing

  • "Car Start" ready indicator in LiFePO4 mode

  • Optional temp sensing lead set

  • Soft start current control - temp controlled in LiFePO4 mode.

Plug Type: US
Supply Voltage: 110V

Made in UK

SPECIFICATION

INPUT: 110-230V AC

WEIGHT: 13.2lb

SIZE: 10.3”x11”x2.5”

ORDER MPL50-Li REPLACEMENT PARTS

We sell replacement parts for the MPL50-Li. Click on the part you need below:

Mains Leads

SB50-YEL

BSU2-50-LS

You May Also Like