BSU2-90C BATTERY SUPPORT UNIT

US$1,399.00

OVERVIEW

The BSU2-90/C Battery Support Unit is derived from the BSU2-125C (90A) Support Unit, but now with a contactor reset for lithium batteries.

BSU2-90/C provides an active stable voltage and up to 90 amps of fully regulated power to prevent loss of charge and damage to the battery.

BSU2-90/C can be used with any 12V automotive battery including Lithium, AGM and GEL.

When the battery is charged the BSU is a regulated power supply to sustain accessory loads and offset parasitic drain.

Designed for use in the workshop and compatible with our diagnostic trolleys.

Contractor reset for lithium batteries.

Portable or wall mount options available.

Reverse polarity protection.

Output current display.

Supplied with IEC power lead and 4.7m output leads.

Compatible with LiFeP04 with 12V Lithium - All technologies

OVERVIEW

The BSU2-90/C Battery Support Unit is derived from the BSU2-125C (90A) Support Unit, but now with a contactor reset for lithium batteries.

BSU2-90/C provides an active stable voltage and up to 90 amps of fully regulated power to prevent loss of charge and damage to the battery.

BSU2-90/C can be used with any 12V automotive battery including Lithium, AGM and GEL.

When the battery is charged the BSU is a regulated power supply to sustain accessory loads and offset parasitic drain.

Designed for use in the workshop and compatible with our diagnostic trolleys.

Contractor reset for lithium batteries.

Portable or wall mount options available.

Reverse polarity protection.

Output current display.

Supplied with IEC power lead and 4.7m output leads.

Compatible with LiFeP04 with 12V Lithium - All technologies

FEATUREs

BSU2-90/C provides a constant voltage to prevent loss of data and possible damage to control units during software updates, and module reprogramming as well as diagnostic processes when in a Key On, Engine Off state.

During diagnostic or programming operations, the vehicle’s systems are operating solely from the battery. Maintaining battery charge during this process is critical.

The status of BSU2-90/C is indicated simply by three LED’s – POWER, POLARITY, DEMAND. When all 3 are illuminated, BSU2-90/C is supporting the battery.

Reset contactors on lithium batteries.

The BSU2-90/C has been designed to meet the needs of the high-power consuming vehicle.

Approved by Jaguar and Landrover.

 

SPECIFICATION

INPUT: 90-260v AC

WEIGHT: 17.6lb

SIZE: 11.6” x 10” x 5.1”

OUTPUT: 14v up to 90A

 

You May Also Like